Connections
Step 3: Connecting TV set
English
IMPORTANT!
–You only need to make one video
connection from the following options, according to the capabilities of your TV system.
–S-Video or Component Video
connection provides higher picture quality. These options must be available on your TV set.
–Connect the system directly to the TV set.
Using Video In jack (CVBS)
●Use the composite video cable (yellow) to connect the system’s VIDEO jack to the video input jack (or labeled as A/V In,Video In, Composite or Baseband) on the TV set.
●To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV set.
●Deactivate Progressive Scan through SYSTEM MENU. Refer to “Using the Setup Menu- Using Progressive Scan to improve image quality”.
Using component Video In jack (Pr PbY)
●Use the component video cables (red/blue/ green) to connect the system’s Pr PbY jacks to the corresponding Component video input jacks (or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV set.
●To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV set.
●If you are using a Progressive Scan TV set (TV with Progressive Scan or ProScan capability), activate the PROGRESSIVE SCAN function through SYSTEM MENU.
13
