Setting up
10
3 Connecting the radio module
The radio module acts as a transmitter and
receiver for radio signals to and from the
handset(s). It goes at the back of the machine
on the right-hand side as you face it.
1Place the spring loaded clip at the bottom of
the module into the slot that runs along the
back of the machine.
2Clip the top part into place by pulling the
module up and towards the machine.
3Connect the cable to the socket on the side
of the machine.
4 Connecting your DECTfax Plusto the telephone line and mainspower
1Plug the telephone line cord into the socket
on the side of the machine, and connect the
other end into the telephone wall socket.
2Plug the power adaptor into the side of the
machine.
3Plug the mains power cable into the power
adaptor, then plug the lead from the power
adaptor into a convenient mains socket.
When the mains power is switched on the
display shows CHECK DATE to prompt you to
set the correct date and time. ‘Setting the
date and time’ on page 13 shows you how to
do this.
IMPORTANT
Do not place the power adaptor next to the radio
module.
IMPORTANT
Before installing the radio module, make sure the
machine is not plugged into the mains.
1
2
3