The customised method
Use this method if you:
Have set the base station handset security code to a number other than 0000.
Want to register a handset to more than one base station.
Want to allocate a handset with a handset number other than the next sequential one.
1At the base station press OK/Menu then 8 then 8 then OK/Menu again.
T |
| T |
|
U | U | ||
8 | V | 8 | V |
2At the handset press OK then 9, then use the ▲ and ▼ buttons to scroll to the first empty location, indicated by a line of dashes in the display.
WX | |
9 | Y |
| Z |
3Press OK. The telephone icon flashes in the display.
4After a few seconds the display shows four dashes (- - - - ) to prompt you to enter the handset security code
5Enter the code that is on the base station, either 0000 or whatever you have changed
it to.
Using additional handsets
6Press OK and the display will show the available handset numbers
7Press the number you want on the keypad - the display will show this number to indicate that the handset is registered.
To change the handset security code
1Press OK/Menu, then 8, then 7.
T |
| P |
|
U | Q | ||
8 | V | 7 | R |
|
|
| S |
2Press OK/Menu. The display shows OLD CODE then ✱ ✱ ✱ ✱.
Enter the old code. This should be 0000, if it has not already been changed.
3The display shows NEW CODE then ✱ ✱ ✱ ✱. Enter the new code. When the 4th digit has been entered, the display returns to standby.
To register a handset to more than one base station
Use ‘The customised method’ to register a handset with up to 4 DECT base stations.
A handset registered to more than one base station will stay ‘linked up’ to its current base station as long as it is in range of it. As the handset moves out of range, it will ‘link up’ with the next base station it comes into range of.
43
