7Press out the smartcard from the card
holding it.
8Insert the smartcard into the slot with the
gold square facing towards you, and replace
the green cover.
9When you have installed the print ribbon
and the smartcard, close the front cover
firmly, making sure both green clips are
securely in place. If the smartcard is
incorrectly installed, or not in place, the
display shows MISSING GAUGE.
Setting up
9
4Remove the clear securing band by pulling
the coloured tab. For the starter ribbon that
comes with the new machine, remove the
foam packing piece.
5Gently pull the smaller spool towards you
and place it in its housing - there are two
slots that hold it in place.
6To install the smartcard, remove the green
cover by pressing on the arrow and sliding it
away from you.
The smartcard monitors how much print ribbon is
being used, and is always supplied with new print
ribbons. The fax machine will not work unless the
smartcard is installed.