10Press the ▲ and ˜ buttons to scroll through the options and press OK/Menu to select the option you require.
If you want to cancel a delayed send simply remove the document from the feeder. Or if the document is to be sent from the memory see ÔTo cancel a timed jobÕ on page 25.
To send the faxes immediately simply press Start after entering the last number.
Using your fax machine
Receiving a fax
You can set your DECTfax Plus to print faxes as they are received or incoming faxes can be stored in the memory, up to 20 Slerexe* pages, and printed out at a later date. The default setting is for memory receive to be switched on.
To switch off memory receive
When memory receive is off, you must ensure paper is in the sheet feeder.
1Press OK/Menu then 3 then 6. The display shows 36 RX IN MEM.
D |
| MN | |
E | |||
3 | F | 6 | O |
|
|
| |
Call back
Call back allows you to interrupt a fax to speak to the person at the other end.
To use call back
1While the document is being sent or received is complete, press Hands Free.
The display will alternate between TRANSMISSION, if a document is being sent, or RECEPTION, if a document is being received and PHONE.
2When the page that is being sent has gone through, the other person’s telephone will ring and if they pick up, your handset will then ring.
3Answer the handset as normal and speak.
2Press OK/Menu. The display shows two options:
Y E S | Incoming faxes are stored in the |
| memory, even if there is paper in |
| the sheet feeder. This is the |
| default setting. |
N O | Incoming faxes are printed as |
| they are received. If there is no |
| paper in the sheet feeder, the |
| faxes are stored in the memory. |
3Use the ▲ and ˜ buttons to select NO. Press
OK/Menu to confirm the change.
* Slerexe is the name for the standard fax page.
19
