Using your handset
31
3Press OK when you have the number
displayed then use Clr to delete the number.
4Enter the new phone number.
5Press OK again to confirm the change.
To dial a number from the directory
There are two ways to do this: you can display
either the two-digit reference number, or the
telephone number itself.
To display the telephone number
1Press the or the button to access the
memory.
2Use the and buttons to scroll through
the telephone numbers until you see the one
you want.
3Press the Talk button and the number will
dial automatically.
To display the reference number
1Press the or the button.
2Enter the reference number you require, for
example 07.
3Press the Talk button and the number will
dial automatically.
To dial a number from the base station
directory
1Press the ibutton on the handset.
2Use the and buttons to scroll through
the telephone numbers until you see the one
you want. (Names will not be displayed at
the handset).
3Press the Talk button and the number will
dial automatically.
You can dial from the memory directly by entering
the two-digit reference number followed by #. For
example 07 then #will immediately dial that
telephone number.
The display shows up to 12 digits. If the number has
more than 12 digits, use the and #buttons to
scroll backwards and forwards through the number.