Tape Operation/Recording
English
IMPORTANT!
–Before playing a tape, check and
tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism.
–Store tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV set or speaker).
Rewinding or forwarding fast when playback is stopped
1Press 1 or ¡ on the front panel or on the remote control.
2Press 7 when you reach the desired passage.
Resetting tape counter number
● In stop mode, press 7.
Tape playback
1Press 5 to open the tape deck door.
2Insert a recorded tape and close the tape door.
●Load the tape with the open side down and the full spool to the left.
3Press TAPE or TAPE1/2 on the remote control
repeatedly to select tape deck 1 or tape deck 2. ➜ The selected tape deck number is displayed.
4Press 38 to start playback.
To stop playback
●Press 7.
Changing the playback mode
●Press AUTO REPLAY repeatedly to select: PLAY or REPLAY. The default setting is PLAY.
REPLAY ...................... the tape will rewind
| automatically at the end of |
| playback and replay. It will |
| replay up to max. 10 times |
| or until you press 9. |
PLAY | the selected side will be |
| played once. |
General information on recording
●If you don’t intend to record via the microphone, unplug it to avoid unwanted recording source.
●For recording, only use tape of IEC type I(normal tape).
●The recording level is set automatically, regardless of the position of the Volume,Vocal, Key control and so forth.
●The type is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for seven seconds.
●To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
●Press RECORD in Disc,Tape,Tuner or AUX mode, “PLEASE CHECK TAPE 2” will scroll on the display if there is no recordable tape in tape deck 2.
40
