Preparations |
|
English |
|
Rear connections | B Antennas Connection |
The type plate is located at the rear of the system.
APower
Ð Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
WARNING!
–For optimal performance, use only the original power cable.
–Never make or change any connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
AM Antenna
12
Fix the claw to the slot
3
AM ANTENNA
●Position the antenna as far as possible from a TV, VCR or other radiation source.
10
