Clock/Timer |
English |
IMPORTANT!
–Use CLOCK•TIMER on the set to set the clock and timer.
–To set clock in the Eco Power mode, press and hold
on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below.
View clock
The clock (if it is set) will be shown in standby mode.
To view the clock in any source mode (CD or TUNER for example)
●Press CLOCK•TIMER.
➜The clock is displayed for a few seconds.
➜If the clock has not been set,
Clock setting
The clock can be set in either
1In standby or view clock mode, press CLOCK•TIMER once. In other source mode, press CLOCK•TIMER twice.
2Press PROGRAM repeatedly to select clock mode.
➜ "AM 12:00" or "00:00" starts flashing.
3Press
4Press
5Press CLOCK•TIMER again to store the setting.
➜ The clock starts working.
To exit without storing the setting
●Press STOP Ç on the system.
Notes:
–The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs.
–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.
27