Manual Preset Programming
1Tune to your desired radio station (refer to ÒTuning to radio stationsÓ).
2Press PROGRAM.
➜PROG starts flashing.
➜The next available preset number is displayed for selection.
To store the radio station to another preset number
●Press
3Press PROGRAM again to store the radio station.
➜ PROG disappears.
●Repeat steps
To exit manual preset mode
●Press Ç on the system.
Notes:
–If you attempt to store more than 40 preset radio stations, "FULL" is displayed.
–During programming, if no key is pressed within 20 seconds, the system will exit the programme mode automatically.
Tuning to preset radio stations
●Once youÕve programmed the radio stations, press
the desired preset number.
➜ The preset number, radio frequency, and waveband are displayed.
For Recording, please refer to “Tape Operation/Recording”.
Radio Reception
English
21