Philips FWV357/55 manual Tape Operation / Recording, Rewinding / Fast forwarding, E n g l i s h

Tape Operation / Recording

	Rewinding / Fast forwarding		Preparation for recording
1	Stop playback, press à or á.	1	Press TAPE to select TAPE 2.
	➜ The tape will stop automatically at the end of	2	Load a recordable tape into tape deck 2 with full
	rewinding or fast forwarding.		spool to the left.
2
	Press Ç to stop rewinding or fast forwarding.	3	Prepare the source to be recorded.
	Note:		VCD Ð load the disc(s).
			TUNER Ð tune to the desired radio station.
	– During rewinding or fast forwarding of a tape, it
			TAPE Ð load the prerecorded tape into tape
	is also possible to select another source (VCD or
			deck 1 with the full spool to the left.
	TUNER, for example).
			AUX Ð connect external equipment.
			When recording is in progress
	General information on
	recording		➜ REC starts flashing.
		●	It is not possible to listen to another source,
●	If you do not intend to record via the
			except tape dubbing.
	microphone, unplug the microphone to avoid
		●	It is not possible to activate the timer function
	accidental mixing with other recording source.
			during recording or tape dubbing.
●	For recording, use only tape of IEC type I

(normal tape).		One touch recording / Recording
● The recording level is set automatically,
regardless of the position of the Volume, DBB,		the mixed sound
DSC and so forth.	1	Press VCD 1/2/3, TUNER or AUX to select
● The tape is secured at both ends with leader
		the source.
tape. At the beginning and end
		You can connect a microphone to record the
of the tape, nothing will be	●
recorded for six to seven		mixed sound (refer to ÒKaraoke - Microphone
seconds.		MixingÓ).
● To prevent accidental recording,	2	Start playback of the selected source.
break out the tab on the left	3	Press RECORD to start recording.
shoulder of the tape side you
want to protect.		To stop recording
● If ÒCHECK TAPEÓ is displayed, the protection
	●	Press Ç on the system.
tab has been broken. Put a piece of clear
adhesive tape over the opening.		Note:
		– One Touch Recording is not possible in TAPE
		mode, "SELECT SOURCE" will be displayed.
		CD Synchronised start recording
	1	Press VCD 1/2/3 to select the disc.

E n g l i s h

IMPORTANT!

–Recording is permissible if copyright or other rights of third parties are not infringed upon.

–Recording is possible only on tape deck 2.

●Press í or ë to select the desired track to start recording.

●You can programme the tracks in the order you want them to be recorded (refer to ÒCD/VCD/ MP3-CD Operations - Programming the disc tracksÓ).

2Press RECORD to start recording.

➜ The disc will start playback automatically.

27