XP SBC HC
Audio Connections | Basic operation |
English
7Adjust the volume to the desired level with the headphone volume control.
Option 2 (figure 5)
Connecting the FM transmitter to a headphone output of an audio source
IMPORTANT
Use only 1 of the audio inputs:
3.5 mm stereo headphone audio input OR the line audio input!
Using both audio inputs at the same time may damage your FM wireless system or your audio source!
1Connect the 2 RCA plugs of the stereo audio cable to the FM transmitter’s audio input 2:
–Check if the red RCA plug (right channel) is connected to the right channel (red) of the FM transmitter’s audio input 2.
–Check if the white RCA plug (left channel) is connected to the left channel (white) of the FM transmitter’s audio input 2.
2Connect the 3.5mm stereo plug of the stereo audio cable to the headphone output of an audio source, such as TV, HiFi or PC.
–In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3 mm stereo adapter plug.
3Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.
4Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.
5To tune, press and hold the tuning control button for about 1 second. Repeat if necessary until the red tuning indication lights up.
6Adjust the volume to the desired level with the headphone volume control.
Basic operation
When the FM transmitter is connected to a:
-line output of an audio source, such as REC OUT or LINE OUT or
-headphone output of an audio source.
1Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.
2Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.
3To tune, press and hold the tuning control button for about 1 second. Repeat if necessary until the red tuning indication lights up.
4Adjust the volume to the desired level with the headphone volume control.
8
