English 27

Problem

Solution

 

 

The light

You have used the SENSEO® coffee machine at an

ring around

altitude higher than 2200 metres above sea level.This

the on/off

has caused the water in the machine to start boiling

button flashes

before it has reached the required temperature,

slowly.

which prevents the machine from functioning

 

properly. Switch off the machine and no longer use it

 

at altitudes higher than 2200 metres above sea level.

The CALC light

You have pressed the 1-cup button and the 2-cup

flashes.

button at the same time.This started the descaling

 

cycle. If you did not intend to start the descaling

 

cycle, simply press the on/off button to switch off the

 

machine. If you did intend to start the descaling cycle,

 

do not interrupt  this cycle but let the appliance

 

operate until the water reservoir is empty.

The CALC light does not go out after descaling.

The CALC light does not go out if the descaling procedure has not been performed correctly. To perform the descaling procedure correctly:

Make sure you start the descaling cycle by pressing the 1-cup button and the 2-cup button at the same time. See chapter ‘Descaling’ for a complete description of the descaling procedure.

Make sure you do not interrupt the descaling cycle. During the descaling cycle, hot water comes out of the coffee spout at intervals and the machine stops descaling 3 to 4 times to let the descaling mixture act and to heat up again. If you press the on/off button to interrupt this cycle, the CALC light stays description of the descaling procedure.

Page 27
Image 27
Philips HD7827 The light, Ring around, On/off, Button flashes, Slowly Which prevents the machine from functioning, Flashes