Philips HD7825, HD7827 user manual Place the 1-cup pod holder q with a used

24English

4Place the 1-cup pod holder q with a used

coffee pod in it in the coffee machine. Close the lid and make sure it is properly locked.

Make sure the lid is closed properly and the lid lever is locked before you start descaling the machine.

Note: Always put a used coffee pod in the pod holder when you descale the machine.This pod serves as a ‘filter’ to prevent the sieve or hole in the pod holder from getting clogged with scale residue.

5 Put a bowl with a capacity of at least 1500ml under the spout to collect the descaling mixture.

6Press the 1-cup button q and the 2-cup button

qqbriefly at the same time to start the

descaling cycle.

,, The CALC light and the light ring around the on/off button starts flashing to indicate that the descaling cycle has started.

,, Hot water comes out of the coffee spout in intervals. During the descaling cycle, the machine stops descaling 3 to 4 times to let the descaler mixture act and to heat up.

Let the machine complete the entire descaling cycle, which takes 4 to 5 minutes. Do not switch off the machine during the descaling cycle!

,, When all the water in the water reservoir has been used up, the first descaling cycle is finished. The light ring around the on/off button starts to flash rapidly.