7Product information
Note
•• Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output Power5W RMS
Bluetooth
Bluetooth | V3.0+EDR |
specification |
|
Supported profiles | HFP v1.5, AD2P v1.2, |
| HSP v1.2 |
Range | 10 m (Free space) |
General information
Power supply | Model: |
Input: | |
| 50/60Hz, 0.6A; |
| Output: 9.0V 1600 |
| mA |
| 2 x AA batteries |
Operation Power | <15 W |
Consumption |
|
Standby Power | <1 W |
Consumption |
|
Dimensions - Main | 195 x 99 x 98 mm |
Unit (W x H x D) |
|
Weight - Main Unit | 0.70 kg |
8 Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power
•• Ensure that the power cord is connected securely.
•• Ensure that there is power at the power supply socket.
•• Ensure that the batteries are installed correctly.
No response from the Bluetooth speaker
•• Disconnect and reconnect the AC power plug, then turn on the Bluetooth speaker again.
•• Check if you have selected the correct audio source.
•• Make sure that your Bluetooth device is within the effective operation range.
Alarm does not work
•• Set the clock/alarm correctly. Clock/alarm setting erased
•• Power has been interrupted or the power plug has been disconnected.
•• Reset the clock/alarm.
EN 10
