
Troublesho
oting


























Setup troubleshooting
Incorrect language appears on the display
These are possible solutions. Try one of the following:
CHANGE THE LANGUAGE SELECTION DURING INITIAL SETUP
After you select a language, Language appears again on the display. To change the selection:
1Press or
repeatedly until the language you want appears on the display.
2Press to save.
SELECT A DIFFERENT LANGUAGE AFTER INITIAL SETUP
1From the control panel, press Copy Mode.
2Press .
3Press or
repeatedly until Tools appears.
4Press .
5Press or
repeatedly until Device Setup appears.
6Press .
7Press or
repeatedly until Language appears.
8Press .
9Press or
repeatedly until the language you want appears on the display.
10Press to save.
Note: If you cannot understand the language on the display, see “Resetting the printer to factory default settings” on page 164.
Power button is not lit
These are possible solutions. Try one or more of the following:
PRESS POWER BUTTON
Make sure the printer is on by pressing .
Troubleshooting