11During the initial setup of your printer, you were prompted to enter the date and time. If you have not entered this information:
aPress twice.
bPress or repeatedly until Tools appears.
cPress .
dPress or repeatedly until Device Setup appears.
ePress .
fPress or repeatedly until Date/Time appears.
gPress .
hEnter the date using the keypad.
iPress .
jEnter the time using the keypad.
kPress .
lIf the hour you entered is 12 or less, press or repeatedly until AM, PM, or 24hr appears.
mPress to save the setting.
Related topics:
•“Using the control panel” on page 88
Blocking unwanted changes to fax settings
This feature blocks network users from changing fax settings.
1From the control panel, press Fax Mode.
2Press .
3Press or repeatedly until Tools appears.
4Press .
5Press or repeatedly until Device Setup appears.
6Press .
7Press or until Host Fax Settings appears.
8Press .
9Press or until Block appears.
10Press to save this setting.
Related topics:
•“Blocking junk faxes” on page 63
•“Using the control panel” on page 88
Faxing
62