English 29

 

Problem

Solution

 

 

the sieve in the centre of the pod holder is not

 

 

clogged. If it is, unclog the sieve by holding the pod

 

 

holder under a running tap;

 

 

the coffee pod has been put properly in the centre

 

 

of the pod holder;

 

 

the sealing ring has not got stuck under the edge

 

 

of the water distribution disc (see figure 1 at the

 

 

beginning of this user manual).

 

 

the water drops on the worktop are not the result

 

 

of placing or removing the water reservoir or

 

 

removing used coffee pods.

 

 

you do not remove the water reservoir when the

 

 

coffee machine is heating up.This may cause water

 

 

that normally ends up in the water reservoir to leak

 

 

out of the machine.

 

 

In all other cases, contact the Philips Consumer Care

 

 

Centre in your country.

 

I cannot take

You can only remove the coffee spout after you have

 

the coffee

removed the coffee collector.

 

spout out of

 

 

the machine.

 

 

I cannot open

A vacuum may have temporarily formed under

 

the lid.

the lid.

 

 

Switch off the machine. Pull up the lever as far as it

 

 

goes and wait 24 hours before you open the lid.

 

 

You may need to use quite some force.

 

 

 

Page 29
Image 29
Philips HD7827 Sieve in the centre of the pod holder is not, Holder under a running tap, Pod holder, Out of the machine