Philips HF8430 manual 10English, Preparing for use, Massager Cleaning, Pre-warmingthe massager

10English

Note:The candles may go on when you put them on the charger. If they do, remove the candles from the charger and tilt them to switch them off.Then put the candles back onto the charger.

Note: For safety reasons, a built-in timer stops the charging process after 12 hours, when the batteries are fully charged. If you have one or more uncharged candles left and want to charge them right away, press the button on the charger to start another charging cycle.When you do this, the charging light goes on again.

Preparing for use

Massager

Cleaning

Thoroughly clean the massager before first use, after every use and when you use it on another body area, to reduce the risk of infection (see chapter ‘Cleaning’).

Pre-warming the massager

The charger has a pre-warming button that you can use to pre-warm the

bottom of the massager to a comfortable temperature (approx. 40°C).

Never warm the massager in an oven or microwave.

1Place the massager in ohe charger. It only fits properly on the charger with the buttons facing up.

2Press the pre-warming button (Fig. 5).

,The pre-warming light ring starts flashing to indicate that the massager is warming up.

,After approx. 5 minutes, the pre-warming light ring stops flashing and lights up continuously to indicate that the massager has reached a comfortable temperature.

,After 30 minutes, the pre-warming function automatically switches off, but you can also switch it off by pressing the pre-warming button again.