![](/images/new-backgrounds/1204378/20437825x1.webp)
Caller List: Press and hold @ (at least two seconds). Use the [ to select an entry from the list of callers.
Notice
Access Function
You can also load the caller list by pressing OK,
21and OK.
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Iden- tification (CLIP) must be activated for your tel- ephone connection (country and network dependent). The number and name will not be shown if the caller suppresses his number.
Sending Fax Manually
1Insert the document.
2Enter the desired number using the numeric keypad or select a saved entry.
3Press ß.
4Press o.
Direct Inward Dialling or Selecting Sub-address
You can send a fax to a
1Enter the desired number using the numeric keypad or select a saved entry.
2Hold R pressed (for at least two seconds).
3Enter the
4Press o. The
Eavesdropping while Connection is Established
You can listen while a connection is established, for exam- ple if a fax transmission constantly fails.
Enter the desired number using the numeric keypad or select a saved entry. Press ß.
Notice
No Hands-free Operation Possible
Sending to Multiple Recipients (= Broadcasting)
You can send one fax to multiple recipients in succession.
Entering Recipients Individually
1Insert the document.
2Press OK, 34 and OK. The document is now read.
3Enter the desired number using the numeric keypad or select a saved entry.
4Confirm with OK.
5Enter the next telephone numbers.
6Confirm with OK. You can enter up to 25 recipients.
7Press o. The device transmits the fax message succes- sively to all recipients.
Sending a Fax to a Group
1Insert the document.
2Press OK, 13 and OK.
3Use [ to select the group to which you would like to send a fax.
4Confirm with OK.
5Using [ select SEND FAX?.
6Confirm with OK.
Notice
Transmission to Multiple Recipients
If your device cannot reach a recipient, the fax message is sent to the other recipients. After the device has called all recipients, it once again dials the numbers that previously could not be reached.
Sending Fax Later
If you would like to make use of the lower telephone tariffs or if the recipient can be reached at some specific time only, you can send the fax at a later
1Insert the document.
2Press OK, 33 and OK.
3Enter the time, at which the document should be trans- mitted, e.g. 14 00 for 2 pm.
4Confirm with OK.
5Enter the desired number using the numeric keypad or select a saved entry.
6Selecting a Saved Entry: Confirm the selected entry using OK.
EN
Fax · Sending Fax Manually | 13 |