EN
Technical Data
Dimensions (L¦×¦H¦×¦W) | ...................355¦×¦102¦×¦244¦mm |
Weight | 2,5¦kg |
Mains Connection | |
Power Consumption |
|
<¦2¦W | |
Transmission | <¦27¦W |
Recommended Ambient | |
Relative Humidity | |
Connection Type | PSTN · PABX |
Dialling Mode Tone / pulse dialling (country dependent)
Standards
Safety | |
Emissions | EN¦55022 Class B |
Immunity | EN¦55024 |
Scanner
Type | |
Scan Width | 212¦mm |
Horizontal Resolution | 8 dots/mm |
Vertical Resolution | Standard: 7,7 lines/mm |
................................................... | Fine: 15,4 lines/mm |
Printer
Type | Thermal printing · Type |
Printing paper | .....................................Thermal paper roll |
Memory
Telephone Book ..................................... up to 50 entries
Document Feed Slot
Capacity | 10 sheets |
Width | |
Length | |
Thickness | |
Weight |
Fax
Type | Group 3 |
Compatibility | |
Data Compression | MH · MR |
Modulation | V.21 · V.27ter · V.29 |
Transfer Speed | 9.600¦bps |
Copier
Technical specifications subject to change with- out notice.
Guarantee
(Terms and Conditions for United King- dom only)
In order to supply the guarantee, you should contact your dealer or Sagemcom Helpdesk. The proof of purchase will be required.
Please make usage of your equipment for the purpose for which it was designed and under normal usage conditions.
Sagemcom do not accept any liability for any usage made out of the frame of its original designed purpose and any conse- quence that may arise from this usage.
Should any malfunctioning arise, the dealer or Sagemcom Helpdesk will advise you what to do.
A) General Guarantee Conditions
Sagemcom undertakes to remedy by repair or exchange at its own convenience, free of charge for labour and replacement parts, any defects in the equipment during the guarantee period of
Unless the customer has concluded with Sagemcom a main- tenance contract in respect of the equipment which specifi- cally provides for repairs to be carried out at the customer's premises, the repairs will not be carried out on the equipment at the customer premises. The customer must however return the defective equipment at his/her own expense, to the address given by the dealer or Sagemcom Helpdesk.
In case a product needs to be sent in for a repair, it always has to be accompanied by a proof of purchase (which is not altered, written on or in any way be made illegible) showing that the product is still under warrantee. In case no proof of purchase is enclosed, the Sagemcom repair center will use the production date as a reference of establishing the warrantee status of the product.
Apart from all legal obligatory rules, Sagemcom, do not give any Guarantee, either implicit or explicit which is not set force in the present section, and could not be hold responsi- ble for any direct or indirect, material or immaterial damage, in or out of the frame of the present guarantee.
If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory rule applica- ble to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect the remaining provisions or parts of this guarantee.
This guarantee does not affect the Customer statutory rights.
B) Exclusions From Guarantee
Sagemcom shall have no liability under the guarantee in respect of:
•) Damage, defects, breakdown or malfunction due to one or more of the following:
–Failure to properly follow the installation process and instructions for use
–An external cause to the equipment (including but not lim- ited to: lightening, fire, shock, vandalism, inappropriate con- ditions of electrical network or water damage of any nature)
–Modifications made without the written approval of Sagemcom
–Unsuitable operating conditions, particularly of tempera- ture and humidity
–Repair or maintenance of the equipment by persons not authorized by Sagemcom
•) Wear and tear from normal daily use of the equipment and its accessories
•) Damage due to insufficient or bad packaging of equipment when returned to Sagemcom
•) Usage of new versions of software without previous approval of Sagemcom
•) Work on any equipment or software modified or added without the prior written consent of Sagemcom
•) Malfunctions not resulting from the Equipment or from software installed in user workstations for the purpose of use of the equipment.
22 | Philips · HFC 325 |
