12English

2Let the shaver run until it stops, undo the two

screws in the hair chamber and remove it.

3Undo the two screws at the back of the shaver

and remove the back panel of the housing.

4Remove the side panels by pulling them off the

sealed power unit.

5 Undo the three screws in the sealed power unit.

6 Remove the back panel of the sealed power unit by means of a screwdriver.

7 Remove the battery.

Be careful, the battery strips are very sharp.

Do not connect the shaver to the mains again after the battery has been removed.

Page 10
Image 10
Philips HQ7340, HQ7320, HQ7310 manual Remove the side panels by pulling them off