16ENGLISH
Note:Water may leak from the socket at the bottom of the appliance when you rinse it.This is normal and not dangerous.
Cleaning the shaving unit in the Jet Clean
System
The Jet Clean System cleans the shaving unit.
Preparing the Jet Clean System for use - Fill the cleaning chamber before first use and when the ‘fluid low’ symbol flashes to indicate
that the fluid level is too low.When the fluid level drops below the minimum level, the cleaning symbol and the ‘fluid low’ symbol start to flash with intervals and the holder returns to its starting position.
1 Simultaneously press the release buttons on
both sides of the cleaning chamber (1).Then lift
the Jet Clean System off the cleaning chamber
(2).
, The cleaning chamber remains behind.
2Unscrew the cap from the bottle with HQ200 cleaning fluid and remove the airtight
seal.
3 Fill the cleaning chamber with HQ200 cleaning fluid up to the MAX indication.
Note: Make sure the cleaning chamber is always filled above the MIN indication.
4 Place the Jet Clean System back onto the cleaning chamber.
Make sure that the release buttons snap back into place.
Downloaded4222.002from.4998www.Manualslib.2.indd .com16 manuals search engine
