ENGLISH 27
and refill the cleaning chamber (see chapter ‘Cleaning and maintenance’).
-The shaving heads may be damaged or worn. Replace the shaving heads (see chapter ‘Replacement’).
-Long hairs may be obstructing the shaving heads. Clean the cutters and guards with the brush supplied (see chapter ‘Cleaning and maintenance’).
2The shaver does not work when I press the on/off button.
-The battery may be empty. Recharge the battery (see chapter ‘Charging’) or connect the shaver to the mains.
-The travel lock may be activated. Press the on/off button for 4 seconds to deactivate the travel lock.
-The temperature of the shaver may be too high. In this case, the shaver does not work.As soon as the temperature of the shaver has dropped sufficiently, you can switch on the shaver again.
3The shaver is not entirely clean after I clean it in the Jet Clean System.
-The cleaning fluid in the cleaning chamber may be soiled. Empty and rinse the cleaning chamber.
-The cleaning fluid level may be too low. If the fluid volume in the cleaning chamber drops below the minimum level during the cleaning program, the program aborts.The cleaning symbol and the ‘fluid low’ symbol flash at intervals and the holder returns to its starting position. Refill the cleaning chamber with cleaning fluid up to the MAX indication (see chapter ‘Cleaning and maintenance’).
-You may have used another cleaning fluid than the original Philips cleaning fluid. Only use HQ200 cleaning fluid.
Downloaded4222.002from.4998www.Manualslib.2.indd .com27 manuals search engine
