Turn on, Switch to standby mode | Philips HSB3280/F7 specs

4Press SETTIME/PROG to conﬁ rm the clock setting.

Turn on

1Press .

»The soundbar switches to the last selected source.

2Wait for automatic setup of wireless connection between the main unit and subwoofer.

»[PAIRING] (pairing) ﬂ ashes.

»If the connection succeeds, [PAIR OK] (pair OK) and are displayed and the blue indicator on the subwoofer lights up.

»If the connection fails, [PAIR FAIL] (pair fail) is displayed and the green indicator on the subwoofer lights up.

»If the wireless connection fails, set up the connection manually.

Switch to standby mode

To switch the soundbar to standby mode:

1Press .

» The clock (if set) is displayed.

To switch the soundbar to Eco Power Standby mode:

1Press and hold to switch the soundbar to Eco Power Standby mode.

»The backlight on the display panel turns off.

»The blue Eco Power indicator lights up.

Set up wireless connection manually

1In standby mode, press and hold SOURCE on the main unit for 3 seconds.

»The blue and green indicators on the subwoofer ﬂ ash alternately.

»[PAIRING] (pairing) ﬂ ashes.

2Press and hold PAIR on the subwoofer for 3 seconds.

»[PAIR OK] (pair OK) and are displayed and the blue indicators on the subwoofer lights up.

3Turn on the main unit again.

Note

•If the wireless connection fails again, check whether there is any conﬂ ict or strong interference (for example, interference from other electronic devices) around your location.After removal of the conﬂ ict or strong interference, repeat the above procedures.

English

EN 19

Image 18

Philips HSB3280/F7 user manual Switch to standby mode, Set up wireless connection manually, Turn on the main unit again

Contents

Manual del usuario Mode d’emploi English USA, Inc. P.O. Box 672768, Marietta, GA Contents Important safety instructions Important Safety Instructions For USA Ames or heat Recycling Reorient or relocate the receiving antennaFor Canada Introduction What’s in the box Power Enable/disable automatic on/standbyOverview of the main unit Overview of the remote control Select the AV input source from the Audio in Coaxial socket Attach the stand Get startedAttach speakers to the main unit Insert a supplied stud into the hole Connect AV devices Option 1 Connect this soundbar to devices through theTV Connect the AV devices directly to the soundbar Game console Connect the AV devices directly to the soundbar DVD player Connect the supplied FM antenna to the FM Antenna socket Connect powerConnect FM antenna Connect one end to the DC in socket on the main unit Set clock Install remote control batteriesClose the battery compartment Connect the other end to the wall outlet Press SETTIME/PROG to conﬁ rm the clock setting Switch to standby modeSet up wireless connection manually Turn on Play from USB PlayPlay an AV source through this soundbar Press OK / to start play Control USB play Select a sound effect Adjust volume level and sound effectAdjust volume level Mute sound Program radio stations automatically Tune to a preset radio stationPress PRESET/ALB/ to select a preset number that you want Program radio stations Manually Press Setup to activate the renaming mode Program remote controlPress Learn to exit the learning mode Rename an AV source Set the sleep timer Enable/disable automatic on/ standbySet the alarm timer To disable Product information USB playability information Replace the battery TroubleshootingRemote control does not work Fully extend the FM antenna What’s in the supplied mounting kit AppendixMount to a wall What else you’ll need Hook the main unit and speakers in place 30 ES