Getting Started (continued)
Step 4: Selecting the matching color system
The color system of the DVD player, disc and TV should match in order for the disc to play. Before changing the TV system, determine the color system of your TV.
- - Video Setup Page - -
TV Type | PAL |
TV Display | Multi |
Progressive | NTSC |
Picture Setting |
|
Set TV Standard
APress 设定 (SETUP).
BPress X to select { Video Setup Page }.
CUse ST repeatedly to select
{TV Type }, then press X.
DUse ST to select one of the options below:
{PAL }
Select this if the connected TV has the PAL color system. It will change the video signal of an NTSC disc and output it to PAL format.
{NTSC }
Select this if the connected TV has the NTSC color system. It will change the video signal of a PAL disc and output it to NTSC format.
{Multi }
Select this if the connected TV is compatible with both NTSC and PAL
ESelect a setting and press OK.
Follow the instructions show on the TV to confirm the selection.
CHANGING PAL TO NTSC:
1.ENSURE THAT YOUR TV SUPPORTS NTSC STANDARD.
2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVERY.
OK |
| CANCEL |
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
OK |
| CANCEL |
FPress W to highlight { OK } and press OK to confirm.
To reset to default TV colour system:
Wait for 15 seconds for the auto recovery.
OR
APress 开/关仓 ç (OPEN/CLOSE) on the DVD player to open the disc tray.
BPress numeric keypad ‘3’ on the remote control for few seconds.
The DVD background menu appears. Tips:
–Before changing the current TV colour setting, ensure that your TV supports the ‘selected TV Type’ system.
–If there is no proper picture on your TV, wait for 15 seconds for auto recovery.
English
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press 设定 (SETUP) to exit the menu item.
17
01_dvp3120K_93_eng2.indd 17 |
