[Analogue Output]
Select an analogue setting based on the audio device that is connected through the analogue audio jack.
•[LT/RT] - For the surround sound output through two speakers.
•[Stereo] - For the stereo output. [Digital Audio]
Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).
•[Digital Output] - Select a type of digital output.
•[All] - Support
•[Off] - Disable digital output.
•[PCM Only] - Downmix to
•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.
•[48kHZ] - For discs recorded at sampling rate of 48 kHz.
•[96kHZ] - For discs recorded at sampling rate of 96 kHz.
Note
•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].
•The higher the sampling rate, the better the sound quality.
[HDMI Audio]
Select the HDMI audio setting when you connect this product and the TV with an HDMI cable.
•[On] - Allow audio output through the TV and the speaker system. If the audio format on the disc is not supported, it will be downmixed to
•[Off] - Disable the audio output from HDMI devices connected to this player.
[Audio Sync]
Set the delay time for audio output when you play a video disc.
1. Press OK.
2. Press 
to set the delay time.
3. Press OK to confi rm and exit.
[Volume]
Set the default volume level when you play a disc.
1. Press OK.
2. Press 
to set the volume.
3. Press OK to confi rm and exit.
[Sound Mode] |
| |
Select a preset sound effect to enhance the audio |
| |
output. | English | |
• | that is produced from the left and right audio | |
[3D] - Select a virtual surround sound effect |
| |
| channels. |
|
• | [Movie Mode] - Select a sound effect for |
|
| movies. |
|
• | [Music Mode] - Select a sound effect for |
|
| music. |
|
[CD Upsampling]
For better sound quality in stereo mode, convert the music CD to a higher sampling rate.
•[Off] - Turn off
•[88.2kHz] - Convert to twice the original sampling rate.
•[176.4kHz] - Convert to four times the original sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
•[On] - Enjoy quiet viewing at night.
•[Off] - Enjoy surround sound with a full dynamic range.
Note
•Applicable only to Dolby Digital encoded DVDs.
Video setup
1 | Press | . |
| » [General Setup] menu is displayed. | |
2 Press 
to select [Video Setup], and then press 
to enter the submenu.
3Select an option, and then press OK.
4Select a setting, and then press OK.
•To return to the previous menu, press
.
• | To exit the menu, press | . |
EN 15
