E n g l i s h
Functional Overview
Main unit and remote control
1 | 2 3 4 | 5 6 7 | 8 | 9 | 0 | ! |
1STANDBY ON (B)
–Switches to standby mode or turns on the system.
2SOUND
– Selects a sound effect.
3BASS
–Selects BASS (low tone) sound mode and use the VOLUME control to change the tone level.
4TREBLE
–Selects TREBLE (high tone) sound mode and use the VOLUME control to change the tone level.
5PROG
–*Enters receiver setup menu.
–TUNER: starts automatic/manual preset programming.
6 
TUNING
– Tunes the radio frequency down.
7TUNING 
– Tunes the radio frequency up.
8System display panel
9SOURCE
–Selects the relevant active source mode: DISC (6CH/COAX/OPTI),
TUNER (FM/MW), AUX or TV. (on the remote only)
–TV: switches to TV source mode.
–DISC: toggles between DISC 6CH, DISC COAX and DISC OPTI source mode.
–TUNER: toggles between FM and MW band.
–AUX: selects AUX mode.
0PHONES
–Plug in the headphones jack. The speakers output will be cancelled.
!VOLUME (VOL +-)
– Adjusts the volume level.
– Selects a setting in receiver setup menu.
* = Press and hold the button for more than five seconds.
12
8239 300 38591
