Getting Started
CENTER DELAY – Select this to set the delay time in relation to the listening position/distance from the centre speaker: 5ms, 3ms, 2ms, 1ms or OFF (default setting).
REAR DELAY – Select this to set the delay time in relation to the listening position/distance from the rear speakers : 15ms, 12ms, 9ms, 6ms, 3ms or OFF (default setting).
TEST TONE – Select this to turn ‘ON’ or ‘OFF’ (default setting) the test tone.
If you have turned on the test tone, the test signal will be automatically generated to help you judge the sound level of each speaker and subwoofer.
MENU OFF – Select this to exit from the system setup.
4Use the VOLUME control to adjust the settings that best suit your surround sound needs.
➜ If the volume control is not used within 5 seconds, it will become normal volume control function.
5Press PROG to confirm your selection. Helpful Hints:
–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.
–If “CHECK SURROUND SETTINGS” appears on the display, press SURROUND button to select surround mode.
–“AUTO PROG’” only available for selection in tuner mode only.
Adjusting the speaker output levels
You can adjust the rear speakers, centre speaker and subwoofer output levels by comparing the sound from the front speakers.
REPEAT | REPEAT | SLEEP | DIM |
SUBW | REAR | CENTER | TV VOL |
●Press the respective buttons on the remote (REAR
Helpful Hint:
– If you have selected Stereo mode, adjusting the centre and rear speakers’ volume level will have no effect.
E n g l i s h
15
8239 300 38591