Philips HTS3377W, HTS3270 Sync audio output with video play, Quick skip play to a specific time

[Disc Interval]

Divides the total disc time by six and play the first few seconds of these intervals.

[Track Interval]

Divides the current track by six and play the first few seconds of these intervals.

This option is not available in stop mode.

Tip

•You can change the PBC setting (see ‘Adjust settings’ > ‘Preferences’ > [PBC]).

Sync audio output with video play

If the video play is slower than the audio output (sound does not match with the pictures), you can delay the audio output to match the video.

1 Press and hold AUDIO SYNC until ‘AUDIO SYNC’ is displayed.

2 Within five seconds, press VOL +/- to set the delay time for audio output.

Note

•If the volume control is not used within five seconds, it resumes normal volume control function.

Quick skip play to a specific time

1 During play, press INFO.

»The disc status menu is displayed.

2 Press to view information, then press OK.

•[TT Time] (title time)

•[Ch Time] (chapter time)

•[Disc Time] (disc time)

•[Track Time] (track time)

3 Press the Numeric buttons to enter the time where you want to skip to, then press OK.

Note

•The options are different depending on the disc type.

Repeat play a specific section

1 During play, press REPEAT A-B where you want to set as the starting point.

2 Press REPEAT A-B again to set the ending point.

»Repeat play starts.

3 To cancel repeat play, press REPEAT A-B again.

Note

•The marked section for repeat play is only possible within a track/title.

24EN