No sound fromTV program.
•Connect an audio cable from the AUDIO input on this Home Theater System to the AUDIO output on your TV. Then press AUDIO SOURCE repeatedly to select the corresponding audio input source.
No surround sound effect from the speakers.
•Press SURR to select a correct surround sound setting.
•Ensure that the source you are playing is recorded or broadcast in surround sound (Dolby Digital, etc).Sound cannot transmit through HDMI connection if the connected device is
Play
DivX video les cannot be played.
•Ensure that the DivX le is encoded according to the ‘Home Theater Pro le’ with the DivX encoder.
•Ensure that the DivX video le is complete.
The aspect ratio of the screen is not aligned with theTV display setting.
•The aspect ratio is xed on the disc.
DivX subtitle does not display correctly.
•Ensure that the subtitle le name is the same as the movie le name.
•Select the correct character set:
1)Press 
SETUP.
2)Select [Preferences], then press 
.
3)Select [DivX Subtitle], then press OK.
4)Select the character set that supports the subtitle.
The contents of the USB ash drive cannot be read.
•The USB ash drive format is not compatible with this Home Theater System.
•Drive is formatted with different le system which is not supported by this unit (e.g. NTFS).
•Maximum size of memory supported is 160GB.
No sound from the rear speakers and the indicator on the wireless receiver blinks continuously for more than one minute. (For HTS3377W only)
•Ensure that all required connections are done and do the following steps:
1)Press 
.
2)Press 
INFO, a screen is displayed.
3)Press 1, then press SURR button within 5 seconds. ‘PAIRING SUCCESS’ is displayed.
4)If ‘PAIRING FAIL’ is displayed, repeat step 1 to 3.
48EN
