Philips HTS3377W, HTS3270 user manual EasyLink Setup

[EasyLink Setup]

If this Home Theater System is connected to HDMI CEC compliant TV/devices, all connected devices can respond to the following commands simultaneously:

Option Description

[EasyLink] Turns off or on all EasyLink features.

To disable this feature, select [Off].

[One When you press PLAY, the Touch TV and Home Theater System Play] are turned on. Disc play starts

if there is a disc in the Home Theater System.

To disable this feature, select [Off].

[One If you press and hold STANDBY Touch for at least 3 seconds, the Home Standby] Theatre System and all the HDMI

CEC devices switch to standby simultaneously.

To disable this feature, select [Off].

[System When you play audio that is Audio routed from the connected Control] devices, this Home Theater

System switches to the corresponding audio source automatically.

To enable this feature, select [On]. Then proceed to [Audio Input Mapping] to scan and map all the connected devices.

[Audio When you map the audio Input input correctly, this Home Mapping] Theater System switches to the

audio from the played device automatically.

Note

•You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink controls. See the TV/devices manual for details.

•Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices.

[Disc Lock]

Sets play restriction for a speci c discs. Before you start, place the disc in the disc compartment (maximum 40 discs can be locked).

•[Lock] – Restricts access to the current disc. Once activated, a password is needed to unlock and play the disc.

•[Unlock] – Plays all discs.

Tip

• You can set or change the password (see ‘Adjust

settings’ > ‘Preferences’ > [Password]).

[Display Dim]

Changes the brightness level of the display panel on this Home Theater System.

•[100%] – Normal brightness.

•[70%] – Medium brightness.

•[40%] – Dimmest display.

[OSD Language]

Selects the default on-screen menu language.

[Screen Saver]

Turns off or on the screen saver mode. Helps to protect the TV screen from being damaged due to over exposure to a static image for too long.

•[On] – Sets the screen saver to appear after 5 minutes of inactivity (for example, in pause or stop mode).

•[Off] – Disable screen saver mode.

[Sleep Timer]

Switches to standby automatically after the preset time.

•[15 mins], [30 mins], [45 mins], [60 mins]

– Selects the count down time before the Home Theater System switches to standby.

•[Off] – Disables sleep timer mode.

English

Adjust settings

EN 37