AccessVCD menu or preview menu
The PBC (Playback Control) for VCD is activated by default in the factory. When you load in a VCD, the contents menu is displayed.
1Press 
to select a play option, then press OK to start play.
•If PBC is off, it skips the menu and starts play from the rst title.
•To return to the menu during play, press 
BACK (only possible if the PBC mode is on).
2Press DISC to preview the contents of the disc.
• To exit the menu, press DISC.
Select Digest Type:
Track Digest
Disc Interval
Track Interval
Sync audio output with video play
If the video play is slower than the audio output (sound does not match with the pictures), you can delay the audio output to match the video.
1Press and hold AUDIO SYNC until ‘AUDIO SYNC’ is displayed.
2Within ve seconds, press VOL +/- to set the delay time for audio output.
Note
•If the volume control is not used within ve seconds, it resumes normal volume control function.
English
Play
3Select a preview play option, then press
OK
[Track Digest]
Plays the rst few seconds of each track in a disc.
[Disc Interval]
Divides the total disc time by six and play the rst few seconds of these intervals.
[Track Interval]
Divides the current track by six and play the rst few seconds of these intervals.
This option is not available in stop mode.
Tip |
• You can change the PBC setting (see ‘Adjust settings’ |
> ‘Preferences’ > [PBC]). |
Quick skip play to a speci c time
1During play, press 
INFO.
» The disc status menu is displayed.
2Press 
to view information, then press OK.
•[TT Time] (title time)
•[Ch Time] (chapter time)
•[Disc Time] (disc time)
•[Track Time] (track time)
3Press the Numeric buttons to enter the time where you want to skip to, then press OK.
Note
•The options are different depending on the disc type.
EN 27
