The Access Filter screen allows you to block or allow specific kinds of Internet usage. You can set up Internet access policies for specific PCs and set up filters by using network port numbers.

Internet Access

Policy

This feature allows you to customize up to 10 different Internet Access Policies for particular PCs, which are identified by their IP or MAC addresses. For each policy's designated PCs, the Router can do one or more of the following:

block or allow Internet access or inbound traffic during the days and time periods specified

block designated services

block websites with specific URL addresses

block websites that use specific keywords in their URL addresses.

To create or edit a policy, follow these instructions:

1.Select the policy's number (1-10) in the drop-down menu.

2.Enter a name in the Enter Policy Name field.

3.Select Internet Access or Inbound Traffic from the Policy Type drop-down box, depending on the kind of access you want to control. Select Internet Access to control your network PCs' access to the Internet. Select Inbound Traffic to control Internet PCs' access to your local area network.

Note: The screen's settings will vary depending on which Policy Type you select.

4.Select Deny or Allow, depending on how you want to control access for specific PCs.

5.Click the Edit List button next to PCs or Internet PCs.

a.On the List of PCs or List of Internet PCs screen, specify PCs by IP address or MAC address. Enter the appropriate IP addresses into the IP fields. If you have a range of IP addresses to filter, complete the appropriate IP Range fields. Enter the appropriate MAC addresses into the MAC fields.

b.Click the Apply button to save your changes. Click the Cancel button to cancel your unsaved changes. Click the Close button to return to the Internet Filter screen.

6.Set the days when access will be filtered. Keep the default setting, Everyday, or select the appropriate days of the week.

7.Set the time when access will be filtered. Keep the default setting, 24 Hours, or check the box next to From and use the drop-down boxes to designate a specific time period.

Note: Access for the listed PCs will be controlled during the selected days and times. Any blocked services or websites will be blocked at all times.

8.In the Blocking Services drop-down boxes, select the services you want to block (the default setting is None). In the Blocking Services fields, the range of ports for this service will appear. If you want to change the range of ports, enter the new numbers in the Blocking Services fields, or edit the service’s settings (see below).

To add a service or edit a service's settings, follow these instructions:

a.Click the Add Service button.

b.To create a new service, enter the name of the service in the Service Name field. To edit a service's settings, select the service from the box on the right of the screen.

c.From the Protocol drop-down menu, select the protocol type for this service: ICMP, UDP, TCP, or UDP & TCP.

d.In the Port Range fields, enter the range of ports for this service.

User’s Guide

25

Page 26
Image 26
Link electronic Wireless 802.11g AP Router Internet Access Policy, To create or edit a policy, follow these instructions