Status | Link electronic Wireless 802.11g AP Router instruction

4.6. Status

This screen displays the Wireless Router's current status and settings. This information is read-only. This page will auto re-flash every 5 seconds to keep most update information.

Host Name: The Host Name is the name of the Router. This entry is necessary for some ISPs.

Domain Name: The Domain Name is the name of the Router's domain. This entry is necessary for some ISPs.

WAN IP Release: Click the WAN IP Release button to delete the Router's current Internet IP address.

WAN IP Renew: Click the WAN IP Renew button to get a new Internet IP address for the Router.

*Click the Refresh button to refresh the Router's status and settings.

User’s Guide

20

Image 21

Link electronic Wireless 802.11g AP Router user manual Status

Contents

Wireless 802.11g AP Router Copyright Statement Contents Introduction Safety Notification PWR/STAT Hardware Installation Turn on Power Supply Web Management Settings Make Correct Network Settings of Your Computer Primary Setup ∙ Default Gateway Dynamic IP Setting Static IP Address∙ User Name and Password Internet IP Address and Subnet Mask User’s Guide Algorithms WPA-Preshared keyWPA Shared Key Server Port Default port being used is Please input the Authentication port of your Radius serverRadius server will accept the authentication if both Please choose your algorithms method. You can select Security User’s Guide System To upgrade the Router’s firmware Click More Info For Windows 98 and Millennium User’s Guide 192.168.1.100 Dhcp Server User’s Guide Snmp Status Advanced Wireless Authentication Type User’s Guide Access Filters To create or edit a policy, follow these instructions Internet Access Policy Summary User’s Guide Virtual Server Port Triggering Enable Dynamic Routing Routing TableStatic Routing, Destination Delete This Entry Click the Delete This Entry button Click the Show Routing TableShow Routing Table DynDNS.org Dynamic DNS My Wireless AP Router will not turn on. No LED’s light up TroubleshootingLAN Connection Problems I can’t access my AP Router Basic Functions User’s Guide