Tuner Operations (continued)
Automatic presetting
Use automatic presetting to store or reinstall all the preset radio stations.
DVD system’s
display panel
1 
TUNER FM
SUBWOOFER 
2 
02
Selecting a preset radio station
●Use 1 2 keys to select a preset number (or use the numeric keypad on the remote).
➜ The preset number followed by radio frequency will appear.
Deleting a preset radio station
English
3 
START..
1Press SOURCE button until
“TUNER FM” appears on the display panel.
2Press 1 2 or use the numeric keypad
3Press and hold PROGRAM until "AUTO" appears.
➜If a radio station is stored in one of the earlier presets, the same radio station will not store under another preset number.
➜If no preset number is selected, automatic preset will begin from preset
(1) and all your former presets will be overridden.
Manual presetting
Use manual presetting to store only your favourite radio stations.
1Tune to your desired radio station (see “Tuning to radio stations”).
2Press PROGRAM.
3Use 1 2 keys to select a preset number that you want to store the current radio station.
4Press PROGRAM again to store.
1In tuner mode, use 1 2 keys on the remote to select a preset radio station.
2Press and hold 9 until “PRESET DELETED” appears.
➜ The radio station continues to play but has been deleted from the preset list.
Changing tuning grid (not available
for all versions)
In some countries, the frequency step between adjacent channels in the MW/FM band is 9 kHz/50 kHz (10 kHz/100 kHz in some areas). The preset frequency step in the factory is 9 kHz/50 kHz.
IMPORTANT!
Changing the tuning grid will erase all previously stored preset radio stations.
1Press SOURCE to select “TUNER FM”.
2Press STANDBY ON to switch the DVD system to standby mode.
3While holding down 2; on the front panel, press STANDBY ON button to access tuner mode.
➜The display will show "GRID 9" or "GRID 10".
Helpful Hint:
–GRID 9 and GRID 10 indicate that the tuning grid is in step of 50 kHz and 100 kHz respectively.
39
39 | 3/3/05, 3:47 PM 3139 115 2xxx1 |
