E n g l i s h
Optional Connections (continued)
Connecting to a Progressive | Connecting to outdoor FM |
Scan TV | antenna terminal |
OUT IN
VIDEO 
TV
1
2 1
|
|
|
| Pr | Pb | Y | 3 |
TO SUB- |
|
|
|
|
|
| 2 |
WOOFER |
|
|
|
|
|
| |
DIGITAL IN | L | AUX IN | R | COMPONENT VIDEO | |||
Junction box | FM Antenna |
|
FM pigtail cable
IMPORTANT!
–The progressive scan video quality is only possible when usingY Pb Pr and a progressive scanTV is required.
–DO NOT connect both SCART and Y Pb Pr to a TV, it may affect the picture quality.
1 Use the component video cables (red/ blue/green - not supplied) to connect the Junction Box’s Y Pb Pr sockets to the corresponding component video input sockets (or labelled as Y Pb/Cb Pr/Cr or YUV) on the TV.
●Do not connect the SCART from Junction Box to your TV.
2To hear the TV channels through this DVD system, use an audio cables (white/ red - not supplied) to connect AUX IN sockets to the corresponding AUDIO OUT sockets on the TV.
3Proceed to pages 20~21 for detailed Progressive Scan set up.
If the FM reception is poor, you can use an FM coaxial cable (not supplied) to connect the FM 75Ω coaxial cable hidden inside the back cover directly to the outdoor FM antenna terminal.
1Open the main DVD system’s back cover by lifting up the cover from the bottom.
2Unplug the FM pigtail antenna from the FM 75Ω coaxial cable.
3Connect the FM 75Ω coaxial cable to one end of the FM coaxial cable which is connected to the outdoor FM antenna terminal.
Helpful Hint:
– Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.
14
14 | 3139 115 2xxx1 | |
22/04/2005, 04:05 PM |
