Philips HTS8010S/01B user manual Accessing Audio Setup, Night Mode turning on/off, CD Upsampling

DVD Setup Menu Options (continued)

E n g l i s h

Accessing Audio Setup Page

1In disc mode, press SETUP MENU.

2Press 1 2 to select ‘Audio Setup Page’.

3Press OK to confirm.

Audio Setup Page

Analog Output

Night Mode

CD Upsampling

Night Mode - turning on/off

When the night mode is activated, the high volume outputs are softened and low volume outputs are brought upward to an audible level (for DVD only). It is useful for watching action movies without disturbing others at night.

1In ‘Audio Setup Page’, use 34 keys to highlight { Night Mode }, then press 2.

{On }

Select this to level out the volume.

{Off }

Select this when you want to enjoy the surround sound with its full dynamic range.

Setting the analogue output

Set Analogue Output to match your DVD home theatre system’s playback capability. This function can also be accessed via the SURR. button on the remote.

1In ‘Audio Setup Page’, press 34 to highlight { Analog Output }, then press 2.

{Stereo }

Select this to change channel output to stereo that delivers sound from only the two front speakers and subwoofer.

{Multi-channel }

Select this to enable Multi-channel output.

2Use 34 keys to select a setting and press OK to confirm.

2Use 34 keys to select a setting and press OK to confirm.

CD Upsampling

This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.

If you have activated the CD upsampling, the system will automatically switch to stereo mode.

1In ‘Audio Setup Page’, use 34 keys to highlight { CD Upsampling }, then press 2.

{Off }

Select this to disable CD-upsampling.

{88.2 kHz (X2) }

Helpful Hint:

–This feature is not available for SACD playback.

Select this to convert the sampling rate of the CDs twice higher than the original.

2Use 34 keys to select a setting and press OK to confirm.

Helpful Hint:

– If you press SURR button on the remote control to select “Multi-Channel” mode, it will disable the CD upsampling feature.

TIPS: The underlined option is the factory default setting.

To return to the previous menu, press 1. To remove the menu, press SETUP MENU.

34

001-049 HTS8000S-00-Eng	34	3139 115 2xxx1
		22/04/2005, 04:06 PM