Manuals / Nortech Systems / Computer Equipment / Switch

Nortech Systems XUSR, RS-232/TERM, RS-422/485, XSYS manual Installing Camera Cables

Models: RS-422/485 XSYS XUSR RS-232/TERM

1 156
Download 156 pages 49.1 Kb
Page 72
Image 72

Chapter 4 - AdeptVision sAVI Option

4.4Installing Camera Cables

Figure 4-3 on page 73 shows the installation of a typical four-camera RS-170 breakout cable and the associated hardware in a SmartController CX system. See the AdeptVision User’s Guide for information on mounting cameras and strobes in your system.

CAUTION: Turn off the controller before installing or removing a camera or cable. Failure to do this may damage the sAVI board.

CAUTION: When using the four-camera breakout cable, you must provide 12 VDC power at sufficient current for the type and quantity of cameras you are using. See the documentation supplied with your cameras for information on current requirements.

Connecting the Cables to the RS-170 Standard Camera

This section describes the steps for connecting the cables between the sAVI board and the RS-170 Cameras.

1.Turn off the SmartController CX.

2.Connect the camera to a 10m camera cable.

3.Connect the 10m camera cable to the appropriate connection on the camera breakout cable.

4.Connect the power supply and strobe lamps through the 9 pin D-sub connector (see Figure 4-2 on page 71 and Table 4-2 on page 76 for pin assignments).

5.Connect the camera breakout cable to the Camera connector on the SmartController CX.

72

Adept SmartController User’s Guide, Rev. E

Page 71 Page 73
Page 72
Image 72
Nortech Systems XUSR, RS-232/TERM, RS-422/485 Installing Camera Cables, Connecting the Cables to the RS-170 Standard Camera
Page 71 Page 73

RS-422/485, XSYS, XUSR, RS-232/TERM specifications

Nortech Systems offers a comprehensive suite of serial communication solutions, including RS-232/TERM, XUSR, XSYS, and RS-422/485 interfaces. These products are designed to facilitate reliable and high-speed data transmission in various industrial applications, making them essential for connecting devices in automation, telecommunications, and data acquisition systems.

The RS-232/TERM interface is a widely adopted standard for serial communication, known for its simplicity and robustness. It supports point-to-point communication over relatively short distances, typically up to 50 feet. Key features include a maximum baud rate of up to 115.2 kbps, error-checking capabilities, and a straightforward connection process, making it ideal for connecting peripheral devices like printers, modems, and barcode scanners.

Building on the RS-232 standard, the XUSR and XSYS devices offer enhanced functionalities and flexibility. XUSR, for instance, supports not just traditional RS-232 connections, but also protocol conversion for various serial interfaces, facilitating seamless integration of legacy systems with modern networking technologies. It is particularly useful in environments where multiple protocols need to be managed simultaneously.

XSYS is designed for more complex applications and supports advanced communication features such as multi-drop configurations, enabling it to connect multiple devices on a single bus. This makes it suitable for extensive industrial networks where space and wiring complexity need to be minimized. Synchronous and asynchronous data transfer modes ensure that the XSYS is adaptable for both real-time data collection and standard command-response applications.

On the other hand, RS-422/485 interfaces excel in long-distance communication, allowing for data transmission over distances up to 4,000 feet. They are designed for multi-point connections, supporting up to 32 devices on a single bus through differential signaling, which enhances noise immunity. These characteristics make RS-422/485 particularly well-suited for environments with electromagnetic interference, such as factories or subways.

Nortech Systems’ serial communication solutions emphasize reliability, ease of use, and versatility. With their commitment to high performance and user satisfaction, these interfaces provide critical connectivity in today’s increasingly automated and interconnected world. Whether in data centers, manufacturing setups, or remote sensor networks, Nortech's offerings stand out for their reliability, efficiency, and adaptability, ensuring effective data communication across diverse applications.