Manuals / Nortech Systems / Computer Equipment / Switch

Nortech Systems RS-422/485, XUSR, RS-232/TERM, XSYS manual Optional DIO Cables, Labeling Cables

Models: RS-422/485 XSYS XUSR RS-232/TERM

1 156
Download 156 pages 49.1 Kb
Page 110
Image 110

Appendix A - sDIO Module

Optional DIO Cables

The cables that connect to the input and output connectors on the sDIO can be ordered as a set of four cables: two input cables and two output cables. These cables have a mating plug on one end and unterminated flying leads on the other end. The wire size of the Adept cables is 0.18 mm2 (24 AWG). You can use these cables to connect to the digital inputs/outputs in your system or to a wiring block.

To comply with IEC 1131, if you choose to supply a wiring block, it should be capable of accepting wire in the range of 0.18 mm2 (24 AWG) to 2.0 mm2 (14 AWG).

Labeling Cables

The X3 and X4 input connectors on the front of the sDIO are similar except that X3 handles the group 1 and group 2 input signals and X4 handles the group 3 and group 4 input signals. The optional digital input cables can be connected to either X3 or X4. Make sure to clearly label the cables once you have completed your installation so that the cables do not get swapped by mistake; see the warning below.

The X1 and X2 output connectors are also similar except that X1 handles the group 1 and group 2 output signals and X2 handles the group 3 and group 4 output signals. The optional digital output cables can be connected to either X1 or X2. Make sure to clearly label the cables once you have completed your installation so that the cables do not get swapped by mistake; see the warning below.

WARNING: Make sure to clearly label the X1 to X4 digital I/O cables so that they are always plugged into the correct connector. Swapping the X3 and X4 or X1 and X2 cables could cause damage to your equipment. Depending on the installation, this could potentially cause injury to personnel in the area.

110

Adept SmartController User’s Guide, Rev. E

Page 109 Page 111
Page 110
Image 110
Nortech Systems RS-422/485, XUSR, XSYS Optional DIO Cables, Labeling Cables, Adept SmartController User’s Guide, Rev. E
Page 109 Page 111

RS-422/485, XSYS, XUSR, RS-232/TERM specifications

Nortech Systems offers a comprehensive suite of serial communication solutions, including RS-232/TERM, XUSR, XSYS, and RS-422/485 interfaces. These products are designed to facilitate reliable and high-speed data transmission in various industrial applications, making them essential for connecting devices in automation, telecommunications, and data acquisition systems.

The RS-232/TERM interface is a widely adopted standard for serial communication, known for its simplicity and robustness. It supports point-to-point communication over relatively short distances, typically up to 50 feet. Key features include a maximum baud rate of up to 115.2 kbps, error-checking capabilities, and a straightforward connection process, making it ideal for connecting peripheral devices like printers, modems, and barcode scanners.

Building on the RS-232 standard, the XUSR and XSYS devices offer enhanced functionalities and flexibility. XUSR, for instance, supports not just traditional RS-232 connections, but also protocol conversion for various serial interfaces, facilitating seamless integration of legacy systems with modern networking technologies. It is particularly useful in environments where multiple protocols need to be managed simultaneously.

XSYS is designed for more complex applications and supports advanced communication features such as multi-drop configurations, enabling it to connect multiple devices on a single bus. This makes it suitable for extensive industrial networks where space and wiring complexity need to be minimized. Synchronous and asynchronous data transfer modes ensure that the XSYS is adaptable for both real-time data collection and standard command-response applications.

On the other hand, RS-422/485 interfaces excel in long-distance communication, allowing for data transmission over distances up to 4,000 feet. They are designed for multi-point connections, supporting up to 32 devices on a single bus through differential signaling, which enhances noise immunity. These characteristics make RS-422/485 particularly well-suited for environments with electromagnetic interference, such as factories or subways.

Nortech Systems’ serial communication solutions emphasize reliability, ease of use, and versatility. With their commitment to high performance and user satisfaction, these interfaces provide critical connectivity in today’s increasingly automated and interconnected world. Whether in data centers, manufacturing setups, or remote sensor networks, Nortech's offerings stand out for their reliability, efficiency, and adaptability, ensuring effective data communication across diverse applications.