Chapter 4 - AdeptVision sAVI Option

4.3Camera Cables

A two-camera breakout cable is standard with Adept vision systems. Adept sells an optional four-camera cable that is used for connecting cameras to the sAVI board. The camera cables connect to the Camera connector on the front of the SmartController CX. This connector contains support for two strobe connections through a breakout cable. See Tables 4-1to 4-6for pin and signal information for the cables.

For single camera, non-reset, non-strobe applications, the two-camera breakout cable is sufficient. Dual megapixel camera applications require a four-camera cable because of current limitations (see page 71).

Although the breakout cables route the signals away from the chassis, they do not connect directly to the camera. To connect to the cameras, you must use an extension cable. Adept offers a 10 meter cable for this purpose. These cables can also be purchased from Intercon 1. Contact Adept Applications Support for current Intercon 1 part numbers.

You can contact Intercon 1 (division of Nortech Systems) at:

Phone: 800-237-9576 or 218-765-3329

http://www.nortechsys.com/intercon

Two-Camera Breakout Cable for RS-170 Cameras

This cable, available from Adept (P/N 10332-01367), has a 44-pin D-sub connector on one end, and it breaks out to two 12-pin Hirose- style camera connectors on the other end. The length of the cable is 1.8 meters (70 inches).

The sAVI board supplies 12 VDC power for cameras through this cable. The current rating is 500 mA maximum per camera, with a combined maximum of 1 A.

To Camera connector on SmartController CX

 

 

 

 

 

 

CABLE ASSY. CAMERA INTERFACE 2X

 

 

 

 

 

 

 

 

ADEPT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAM 1

CAM 2

31

1

44

15

Figure 4-1. Two-Camera Breakout Cable for RS-170 Cameras

70

Adept SmartController User’s Guide, Rev. E

Page 69 Page 71
Page 70
Image 70
Nortech Systems RS-422/485, XUSR, RS-232/TERM, XSYS manual Camera Cables, Two-Camera Breakout Cable for RS-170 Cameras
Page 69 Page 71

RS-422/485, XSYS, XUSR, RS-232/TERM specifications

Nortech Systems offers a comprehensive suite of serial communication solutions, including RS-232/TERM, XUSR, XSYS, and RS-422/485 interfaces. These products are designed to facilitate reliable and high-speed data transmission in various industrial applications, making them essential for connecting devices in automation, telecommunications, and data acquisition systems.

The RS-232/TERM interface is a widely adopted standard for serial communication, known for its simplicity and robustness. It supports point-to-point communication over relatively short distances, typically up to 50 feet. Key features include a maximum baud rate of up to 115.2 kbps, error-checking capabilities, and a straightforward connection process, making it ideal for connecting peripheral devices like printers, modems, and barcode scanners.

Building on the RS-232 standard, the XUSR and XSYS devices offer enhanced functionalities and flexibility. XUSR, for instance, supports not just traditional RS-232 connections, but also protocol conversion for various serial interfaces, facilitating seamless integration of legacy systems with modern networking technologies. It is particularly useful in environments where multiple protocols need to be managed simultaneously.

XSYS is designed for more complex applications and supports advanced communication features such as multi-drop configurations, enabling it to connect multiple devices on a single bus. This makes it suitable for extensive industrial networks where space and wiring complexity need to be minimized. Synchronous and asynchronous data transfer modes ensure that the XSYS is adaptable for both real-time data collection and standard command-response applications.

On the other hand, RS-422/485 interfaces excel in long-distance communication, allowing for data transmission over distances up to 4,000 feet. They are designed for multi-point connections, supporting up to 32 devices on a single bus through differential signaling, which enhances noise immunity. These characteristics make RS-422/485 particularly well-suited for environments with electromagnetic interference, such as factories or subways.

Nortech Systems’ serial communication solutions emphasize reliability, ease of use, and versatility. With their commitment to high performance and user satisfaction, these interfaces provide critical connectivity in today’s increasingly automated and interconnected world. Whether in data centers, manufacturing setups, or remote sensor networks, Nortech's offerings stand out for their reliability, efficiency, and adaptability, ensuring effective data communication across diverse applications.
Top Page Image Contents