Chapter 2 - SmartController Installation

NOTE: If you are replacing an existing CF, the original must be sent to Adept for replacement. Press the button inside the CF compartment to eject the original card, remove it, and return it to Adept. Contact Adept Customer Service for assistance.

3.Carefully remove the CF from the READ ME FIRST box or shipping container. Locate the CF slot and position the card so its connector is facing towards the SmartController and the label is facing up.

4.Insert the CF into the SmartController.

NOTE: Your licenses were installed onto the CF at the factory when it was

initialized. Your licenses must be reinstalled onto a new CF by using the provided passwords and the V+ INSTALL monitor command. These passwords are provided in a box or folder labeled READ ME FIRST.

Once installed, Adept recommends that you do not repeatedly remove and insert the CF.

Connecting Power

The SmartController and sDIO require filtered 24VDC power.

NOTE: Users must provide their own power supply. Make sure the power cables and power supply conform to the specifications below.

24VDC Power Specifications

Table 2-2. Specifications for 24VDC User-Supplied Power Supply

Customer-Supplied Power

24VDC, 120W (5A).

Supply

 

 

 

Circuit Protection

Not more than 8A (below the

 

amperage rating of the cable used).

 

 

Power Cabling

1.5 - 1.85 mm2 (16-14 AWG),

 

maximum length 10 meters

 

 

Shield Termination

Braided shield connected to “-”

 

terminal at the appropriate XDC

 

connector.

 

 

NOTE: The power requirements for the user-supplied power supply will vary depending on the configuration of the SmartController and connected devices. A minimum configuration of the controller, front panel and MCP will require 1A at 24VDC. However, a 24V, 5A power supply is recommended to allow for additional current draw from connected devices, such as external IEEE 1394 devices and digital I/O loads.

30

Adept SmartController User’s Guide, Rev. E

Page 29 Page 31
Page 30
Image 30
Nortech Systems RS-422/485, XUSR, RS-232/TERM, XSYS manual Connecting Power, 24VDC Power Specifications
Page 29 Page 31

RS-422/485, XSYS, XUSR, RS-232/TERM specifications

Nortech Systems offers a comprehensive suite of serial communication solutions, including RS-232/TERM, XUSR, XSYS, and RS-422/485 interfaces. These products are designed to facilitate reliable and high-speed data transmission in various industrial applications, making them essential for connecting devices in automation, telecommunications, and data acquisition systems.

The RS-232/TERM interface is a widely adopted standard for serial communication, known for its simplicity and robustness. It supports point-to-point communication over relatively short distances, typically up to 50 feet. Key features include a maximum baud rate of up to 115.2 kbps, error-checking capabilities, and a straightforward connection process, making it ideal for connecting peripheral devices like printers, modems, and barcode scanners.

Building on the RS-232 standard, the XUSR and XSYS devices offer enhanced functionalities and flexibility. XUSR, for instance, supports not just traditional RS-232 connections, but also protocol conversion for various serial interfaces, facilitating seamless integration of legacy systems with modern networking technologies. It is particularly useful in environments where multiple protocols need to be managed simultaneously.

XSYS is designed for more complex applications and supports advanced communication features such as multi-drop configurations, enabling it to connect multiple devices on a single bus. This makes it suitable for extensive industrial networks where space and wiring complexity need to be minimized. Synchronous and asynchronous data transfer modes ensure that the XSYS is adaptable for both real-time data collection and standard command-response applications.

On the other hand, RS-422/485 interfaces excel in long-distance communication, allowing for data transmission over distances up to 4,000 feet. They are designed for multi-point connections, supporting up to 32 devices on a single bus through differential signaling, which enhances noise immunity. These characteristics make RS-422/485 particularly well-suited for environments with electromagnetic interference, such as factories or subways.

Nortech Systems’ serial communication solutions emphasize reliability, ease of use, and versatility. With their commitment to high performance and user satisfaction, these interfaces provide critical connectivity in today’s increasingly automated and interconnected world. Whether in data centers, manufacturing setups, or remote sensor networks, Nortech's offerings stand out for their reliability, efficiency, and adaptability, ensuring effective data communication across diverse applications.
Top Page Image Contents