Chapter 1 - Introduction

Inappropriate Uses of the Adept SmartController

The Adept SmartController is intended for use as a component subassembly of a complete industrial automation system. The SmartController subassembly must be installed inside a suitable enclosure. Installation and usage must comply with all safety instructions and warnings in this manual. Installation and usage must also comply with all applicable local or national statutory requirements and safety standards. The SmartController subassembly is not intended for use in any of the following situations:

•In hazardous (explosive) atmospheres

•In mobile, portable, marine, or aircraft systems

•In life-support systems

•In residential installations

•In situations where the SmartController subassembly may come into contact with liquids.

•In situations where the SmartController subassembly will be subject to extremes of heat or humidity. See specifications for allowable temperature and humidity ranges.

1.5Standards Compliance

The Adept SmartController is intended for use with other equipment and is considered a subassembly rather than a complete piece of equipment on its own. The SmartController meets the requirements of these standards:

EN 61000-4-2

EN 61000-4-3

EN 61000-4-4

EN 61000-4-5

EN 61000-4-6

EN 50081-2

To maintain compliance with the above standards, the SmartController must be installed and used properly with any additional equipment, in accordance with all regulations of the standards. You must also carefully follow all installation instructions in this user’s guide.

20

Adept SmartController User’s Guide, Rev. E

Page 19 Page 21
Page 20
Image 20
Nortech Systems XUSR, RS-232/TERM, RS-422/485, XSYS Standards Compliance, Inappropriate Uses of the Adept SmartController
Page 19 Page 21

RS-422/485, XSYS, XUSR, RS-232/TERM specifications

Nortech Systems offers a comprehensive suite of serial communication solutions, including RS-232/TERM, XUSR, XSYS, and RS-422/485 interfaces. These products are designed to facilitate reliable and high-speed data transmission in various industrial applications, making them essential for connecting devices in automation, telecommunications, and data acquisition systems.

The RS-232/TERM interface is a widely adopted standard for serial communication, known for its simplicity and robustness. It supports point-to-point communication over relatively short distances, typically up to 50 feet. Key features include a maximum baud rate of up to 115.2 kbps, error-checking capabilities, and a straightforward connection process, making it ideal for connecting peripheral devices like printers, modems, and barcode scanners.

Building on the RS-232 standard, the XUSR and XSYS devices offer enhanced functionalities and flexibility. XUSR, for instance, supports not just traditional RS-232 connections, but also protocol conversion for various serial interfaces, facilitating seamless integration of legacy systems with modern networking technologies. It is particularly useful in environments where multiple protocols need to be managed simultaneously.

XSYS is designed for more complex applications and supports advanced communication features such as multi-drop configurations, enabling it to connect multiple devices on a single bus. This makes it suitable for extensive industrial networks where space and wiring complexity need to be minimized. Synchronous and asynchronous data transfer modes ensure that the XSYS is adaptable for both real-time data collection and standard command-response applications.

On the other hand, RS-422/485 interfaces excel in long-distance communication, allowing for data transmission over distances up to 4,000 feet. They are designed for multi-point connections, supporting up to 32 devices on a single bus through differential signaling, which enhances noise immunity. These characteristics make RS-422/485 particularly well-suited for environments with electromagnetic interference, such as factories or subways.

Nortech Systems’ serial communication solutions emphasize reliability, ease of use, and versatility. With their commitment to high performance and user satisfaction, these interfaces provide critical connectivity in today’s increasingly automated and interconnected world. Whether in data centers, manufacturing setups, or remote sensor networks, Nortech's offerings stand out for their reliability, efficiency, and adaptability, ensuring effective data communication across diverse applications.
Top Page Image Contents