Philips HTS8100 Mounting the main unit, Attach the supplied knobs to the rear of the main unit

Optional Connections (continued)

C

D

A

B

EI

F

G H

English

Mounting the main unit

CAUTION!

Risk of personal injury and damage to the unit. Allow only qualified persons to mount the unit.

Before you start ...

Make sure that all cables have been connected to the main unit.

A Attach the supplied knobs to the rear of the main unit.

B Turn the main unit over so that the bottom of the main unit faces up.

C While you hold the main unit fi rmly with one hand, grasp one of the rubber speaker feet and push it towards the back of the main unit.

D Repeat step three to remove the other speaker foot.

E Position and mark the supplied bracket where you intend to mount the main unit.

F Drill the screw holes.

G Insert the rubber wall plugs (not supplied) into the holes.

H Secure the bracket onto the wall with the screws (not supplied).

I Hook the main unit fi rmly onto the mounted bracket. Slide the knobs through the bracket’s key holes and lock into position.

Helpful Hint:

–To mount the main unit below your TV, leave at least 10cm (4 inches) of space between the TV and the bracket.

19