|
|
| Troubleshooting (continued) |
|
|
|
|
Problem (USB/HDMI/Dock Station) | Solution | ||
The contents of the USB flash | – | The USB fl ash drive format is not compatible with this | |
drive cannot be read. |
| unit. |
|
| – Drive is formatted with a different fi le system which is | ||
|
| not supported by this unit (e.g. NTFS). | |
Slow operation of the USB | – | Large fi le size or high memory USB fl ash drive takes | |
flash drive. |
| longer time to read and display on the TV. | |
No audio output from HDMI | – | You will not hear any sound from the HDMI output if | |
connection. |
| the source device is only DVI/HDCP | |
|
| Digital Content | |
| – | It is not possible to output SACD or | |
|
| ||
| – | Make sure that the audio output setting is not turned | |
|
| off. See ‘Setup Menu Options - { Audio Setup Page - | |
|
| HDMI Audio }’ for details. | |
No video output from HDMI | – | HDMI connection can only be made to HDMI- | |
connection. |
| equipped devices with HDCP (High Bandwidth Digital | |
|
| Content Protection). If you wish to connect to a DVI | |
|
| connector (equipped with HDCP), you will need a | |
|
| separate adaptor (DVI to HDMI). | |
| – | Make sure the resolution of this unit matches the | |
|
| device you have connected using the HDMI. See | |
|
| ‘Setup Menu Options - { Video Setup Page - HDMI | |
|
| Setup - HDMI Video }’ for details. | |
No picture after changing the | – | Your TV cannot support the current HDMI video | |
HDMI video resolution. |
| resolution. Switch the HDMI video resolution to the | |
|
| next setting by holding down the SELECT/PROGRAM | |
|
| on the remote control for more than 3 seconds | |
|
| repeatedly until the picture appears on the TV again. | |
No video from iPod playback. | – | Make sure you have connected the 3.5mm video cable | |
|
| from the docking station to your TV. Turn on your | |
|
| TV to the correct video input channel. | |
| – | Turn on the ‘TV ON’ setting of the iPod. | |
‘NONE DOCKED’ appears on | – | Remove the GoGear/iPod from the docking cradle | |
the display panel. |
| and reinsert again. | |
| – | If the battery level of your GoGear/iPod is totally | |
|
| drained, you have to charge it again before use. | |
|
|
|
|
English
51
