Philips ISP1301 manual Select Mode of Operation, Enable/Disable charge-pump

Philips Semiconductors ISP1301 USB OTG Transceiver Eval Kit User’s Guide

Figure 5-3: Read/Write register screen display

5.3.5.Select Mode of Operation

You can select the mode of operation of the ISP1301 by selecting item 5 from the main menu. A submenu will appear on the screen. See Figure 5-4. The possible choices include the USB functional mode (four data encoding and decoding methods), transparent I2C mode, transparent buffer mode, USB suspend mode, and global power- down mode.

Note: If the ISP1301 Engineering Sample 1 (ES1) (that is, the chip whose version register reads 0x0100, or the chip package is marked ####AX) is mounted on the evaluation board, software cannot wake up the chip, if set to the global power-down mode. Only a hardware reset can wake up the chip.

Figure 5-4: Select Mode of Operation screen display

5.3.6.Enable/Disable charge-pump

If the charge pump in the ISP1301 is disabled, selecting menu item 6 will enable the charge pump. If the charge pump is enabled, selecting menu item 6 will disable it.

UM10028_1		© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
User’s Guide	Rev. 1.0—February 2003	11 of 18