Philips Semiconductors ISP1521
Hi-Speed USB hub controller
Product data Rev. 03 — 24 November 2004 9 of 53
9397 750 13702 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
[1] The maximum current the ISP1521 can sink on a pin is 8 mA.
[2] Symbol names ending with underscore N (for example, NAME_N) represent active LOW signals.
[3] To disable a downstream portn, connect both pins DPn and DMn to VCC (3.3 V); unused ports must
be disabled in reverse order starting from port 7.
[4] Downstream ports 1 and 2 cannot be disabled.
GND 71 - ground supply
GRN1_N 72 I/O output — green LED port indicator (open-drain) for downstream
facing port 1
input — function of the pin when used as an input is given in
Tabl e 9
AMB1_N 73 I/O output — amber LED port indicator (open-drain) for
downstream facing port 1
input — function of the pin when used as an input is given in
Tabl e 8
GRN6_N 74 I/O output — green LED port indicator (open-drain) for downstream
facing port 6
input — function of the pin when used as an input is given in
Tabl e 9
AMB6_N 75 I/O output — amber LED port indicator (open-drain) for
downstream facing port 6
input — function of the pin when used as an input is given in
Tabl e 8
GRN5_N 76 I/O output — green LED port indicator (open-drain) for downstream
facing port 5
input — function of the pin when used as an input is given in
Tabl e 9
AMB5_N 77 I/O output — amber LED port indicator (open-drain) for
downstream facing port 5
input — function of the pin when used as an input is given in
Tabl e 8
HUBGL_N 78 O hub GoodLink LED indicator output; the LED is off until the hub
is configured; a transaction between the host and the hub will
blinkthe LED off for 100 ms; this LED is off in the suspend mode
(open-drain)
SCL 79 I/O I2C-bus clock (open-drain); see Tab le 11
SDA 80 I/O I2C-bus data (open-drain); see Ta ble 11
Table 2: Pin description[1]
…continued
Symbol[2] Pin Type Description