SpeechMike Barcode Scanner Quick Reference

3

SpeechMike Barcode Scanner Quick Reference

General Information

This usage guide contains information how to use your SpeechMike Barcode Scanner.

Information about system requirements, installation, SpeechMike buttons, and troubleshooting can be found in the SpeechMike Quick Reference guide provided with this product.

Barcode Scanner

The SpeechMike Pro Barcode Scanner has a built-in bar code scanner that can be programmed to suit the application you are using. The scanner is connected to the PC via the USB interface. The scanner supports the following standards: EAN, UPC, Code 128, Code 39, Code 93, Code 11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI Code, and RSS.

SpeechMike Barcode Scanner Buttons

Using the scanner

The barcode scanner is activated by pressing the scanner trigger button. The device will scan for 3 seconds each time the trigger is depressed. You can scan barcodes at a distance up to 30 cm.

When the barcode has been scanned successfully, the device will beep and the numbers and letters of the barcode are inserted into the currently active application.

Adjusting the scan angle

The scan angle of the barcode scanner can be adjusted in two positions by 25° for your convenience.

Page 3
Image 3
Philips LFH 5284 manual SpeechMike Barcode Scanner Quick Reference, General Information, SpeechMike Barcode Scanner Buttons