Philips LTC0600 installation manual Function SET-UP

Default mode	Mode 3
	Mode 2
	Mode 1
	Default mode

Digital Camera

Mode	LVL	BLC	2
1	LL	Phase

AWB

9.2 FUNCTION SET-UP

Use the buttons to change the following settings:

Mode 3		Video Level	On
		-30, +30
Mode 2
Mode 1
		DC Lens
Default mode		VI Lens	Off
Mode	Lens Initialisation		Backlight Comp

Mode LVL BCL

AWB LL Phase

	Linelock	V-phase Deg
		H-phase
		extVphase
White Balance	Linelock On	ϕ 358°
Auto
White Balance
	Linelock Off
Hold		ϕ 0°

Default

30 sec. Default

9.2.1 Mode setting

The camera is delivered operating in Mode 1.

In total three modes are available.

Mode 1 = Backlight compensation

Mode 2 = Traffic

Mode 3 = Night (low light mode)

Mode 0 is a non-programmable mode (Default mode) in which factory settings are stored.

9.2.2 Video level setting

The nominal video level setting is 700 mV contrast. Adjustments are possible in +30/-30 steps.

9.2.3 Backlight compensation

Turn on the backlight compensation to improve the image quality when you have a scene where the background features a high level of illumination.

To adjust the amount of back light compensation the use of the software configuration tool is needed.

9.2.4 Automatic White Balance

The white balance setting automatically controls the different color components in the picture to obtain the most natural color reproduction.

Automatic white balance control is provided between 2700 K to 10,000 K.

9.2.5 White Balance Autostore

The white balance autostore automatically adjusts the cameras; white balance & stores this setting for further use.

9.2.6 Linelock setting

Use this button to select between internal synchronisation and linelock.The camera will switch to external lock when an external lock source is connected (see 9.2.7-9.2.9) When DC is supplied, the camera selects internal synchronisation.

English

14 15