Philips LTC0600 installation manual Specifications, Mtf, Agc

9.2.7 Linelock Phase

This function is active when the camera operates in linelock mode.

9.2.8 H Phase

This function is active when the camera operates with external synchronisation (H+V). Use the H-phase setting to adjust Horizontal timing differences when cameras are H-V synchronised. Input standard CVBS synchronisation signals.

9.2.9 ext V Phase

This function is active when the camera operates with external synchronisation. (External V)

Use the extV phase setting to adjust V phase differences when cameras are used in a system. Input; Positive V-pulse, 8-50% duty cycle, 5 V CMOS level.

10	Specifications
	LTC 0600/10 models, PAL
	Pick-up Device:	752 (H) x 582 (V) active pixels, Interline Transfer CCD.
	Scanning Area:	7.95 (H) x 6.45 (V) mm. Equivalent to 1/2” diagonal scanning area.
	Scanning PAL:	625 lines / 50 fields / 25 frames, interlaced
	Horizontal:	15.625 kHz
	Vertical:	50 Hz
	LTC 0600/20 models, NTSC
	Pick-up Device:	768 (H) x 494 (V) active pixels, Interline Transfer CCD.
	Scanning Area:	7.95 (H) x 6.45 (V) mm. Equivalent to 1/2” diagonal scanning area.
	Scanning PAL:	525 lines / 60 fields / 30 frames, interlaced
	Horizontal:	15.734 kHz
	Vertical:	60 Hz
	Horizontal Resolution:		480 TVL
	MTF:		≥ 45 % at 4 MHz
	Sensitivity:		Usable Picture		Full Video
	Scene illumination:1)		fc	0.03	0.17
			lx	0.3	1.7
	Imager illumination:		fc	0.003	0.02
			lx	0.03	0.2
	1) for f/1.2 lens, 89% scene reflectance and 18 dB AGC
	Signal-to-Noise:		50 dB at 1.7 lux (0.17 fc) sensor illumination
			(Unified weighting filter in accordance with CCIR Rec. 567)

AGC:	18 dB
Selectable2):	24 dB
Automatic shutter:	up to 1/100,000 sec.
Selectable2):	ON, OFF, Flickerless
Manual shutter:	1/60 up to 1/10,000
Selectable2):
Auto Black:	ON, OFF
Selectable2):
Black level:	15 fixed levels
Contouring:	H and V symmetrical,
Selectable2):	15 fixed levels,Automatic and OFF
Compression:	White Compression
Selectable2):	15 fixed levels and OFF
Gamma:	Contrast Enhancement
Selectable2):	15 fixed level, 0.25 up to 1
White Balance:	Auto sensing (TTL)
Auto AWB:	2700 K to 10,000 K
Auto store:	2700 K to 10,000 K
Video Output
Video output 1:	BNC isolated from mechanical earth, 75 Ω,AC coupled,
Video output 2:	nominal 1 V[p-p] Pal or NTSC composite,
	4 pin S-VHS connector 75 Ω,AC coupled
Selectable2):	S-VHS. Level: Y 1 V[p-p], C, 300 m V[p-p]. or
	Balanced output. 2 V[ ] into 150 Ω. Unbalance -20 dB at 5 MHz
	p-p
Synchronization:	Internal crystal reference, Line-locked, H/V-lock, ext V-lock
Sync. Input	BNC isolated from mechanical earth
Input impedance:	Selectable2): 75 Ω or >10 kΩ AC coupled
External H/V lock:	Nominal CVBS 1 V[p-p] (min. 150 mV, max. 600 mV)
External V-lock:	Positive V-pulse, 8%-50% duty cycle, Standard 5 V, Cmos level
Capture time:	≤2 s.
Serial Input/Output:	Sub D, 9-pole connector, RS 232 Selectable2): 1200, 2400,
	4800 baud. Connector pinnings:TX=2, Rx=3, Ground=5
User input:	Switch to Mode 3, Mode select input=1, Ground=5. Pull-up
Selectable2):	10 kΩ to +5V
	Active low or active high or disable.

2) Selection by PC software LTC0650/00

English

16 17